ProdcutLines

  • Options

Line Interactive UPS APA-1/1.5KVA

big_pic

Features

  • CPU Design base
  • Pure sine wave
  • Intelligent Charging controlled
  • Input power factor improved charger
  • Intelligent two- way dialogue interactive LCD control panel dot matrix display
  • Multiple interfaces options /RS232/RS485/MOBUS/USB/SNMP
  • Detachable control LCD panel function
  • Compact design
  • Cold start
  • Intelligent fan speed control
  • Overload, overheat, surges, spikes, short circuit, over charge protection
  • Long time backup
  • Support Linear & Nonlinear loads
  • Integrate with Genset
  • Easy battery replacement
  • Rack/Tower convertible

Overview

The Vesta series provides comprehensive protection and high power density in small and economic package. Compared to traditional UPS towers of the same size, Vesta UPS is more compact and offers greater comprehensive power protection against surges and spikes. Equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equipment while its embedded microprocessor controller guarantees high reliability, perfect for any home or small office applicatio
Specifications

Capacity (VA / Watt)

1KVA / 625W

1.5KVA/938W

Mode Type

Rack

 Input

 Nominal Voltage

110/115/120 Vac or 220/230/240Vac

 Voltage Range

 Acceptable Voltage Range

85Vac ~ 150Vac or 170Vac ~ 300Vac

 Frequency

45Hz ~ 70Hz Auto-sensing

 Boost Transfer

97.8Vac ± 2% ; 195.5Vac ± 2%

 Boost Return

102.8Vac ± 2% ; 205.5Vac ± 2%

 Buck Transfer

132Vac ± 2% ; 264.5Vac ± 2% 

 Buck Return

127Vac ± 2% ; 254.5Vac ± 2%

 Low Voltage Transfer

85Vac ± 2% ; 170Vac ± 2%

 Low Voltage Return

90Vac ± 2% ; 180Vac ± 2%

 High Voltage Transfer

150Vac ± 2% ; 300Vac ± 2%

 High Voltage Return

145Vac ± 2% ;
2% 

 Output

 Voltage

110/115/120Vac or 220/230/240Vac re-settable via LCD panel

 Voltage Regulation

 Line Mode

± 15%

 Battery Mode

< 3% RMS for entire battery voltage range

 Frequency Regulation

Line Mode

Synchronize to AC Mains

Battery Mode

50Hz or 60Hz

Power Factor

0.625

 Wave Form

Pure Sine wave

 Effeciency

Line Mode

> 98 %

Battery Mode

> 80%

 Overload Protection

Line Mode

> 110%, then Buzzer Alarm and Amber LED blink continuously.

Battery Mode

110%~150% for 30 sec, >150% for 200ms, then UPS Shuts Down

 Short Circuit Protection

Line Mode

Circuit Breaker

Battery Mode

Electronic Circuit

 DC Start

 Cold Start

 

Yes

 

 

Transfer Time

Typical

< 4 ms.

 Battery

 Battery Voltage

18Vdc

24Vdc

 Battery Type

7.2AH

7.2AH

 Battery Quantity

3pcs

4pcs

Backup Time

> 3 min

Recharging current

0.1C ~ 0.3C

Control Panel

 LCD Display

UPS status, I/P&O/P Voltage Frequency, Load Level, Battery Voltage & Level,  Temperature, Model

LED Display 

Normal (Green), Warning (Amber), Fault (Red)

 Audible Alarm

Battery  Mode  

Beeping every 4 seconds

Low Battery

Beeping every second

UPS Fault

Beeping Continuously

Overload

Beeping twice per second

 Communication Interfaces

Standard

RS232

Multi-Interfaces Card(Option)

Various Comb. of RS232,SNMP,USB,Dry Contact,AS400, Modbus. Enable at the same time.

 Environment

 Operation Temperature

0-40 degree C; 32-104 degree F

 Relative Humidity

0-95% non-condensing

 Audible Noise

Less than 55dBA (at 1M)

 Physical

 (WxHxD)mm

440*44*515

440*44*515

 Net Weight (Kgs)

 18

 20

 NEMA Outlets (110/115/120Vac)

4

  IEC  Outlets  (220/230/240Vac)

5

 Safety Conformance

 Safety Standard

EN62040-1-1

 EMC

EN62040-2

 Marks

CE

*Specifications are subjected to change without prior notice.